The allure of old furniture comes partly from imagining its story, who used it and what they were doing. Sometimes those questions actually get answered.

While refinishing a chest of drawers with a butler drawer, antique restorer Marshall Young found a photo of a young man, the father of the person who brought it in. “Our customer was amazed at the transformation of the chest, and said he remembered his father sitting there, worrying over the bills,” says Young. “When we showed him the photo we found, he broke into tears.” Want to restore your old table? Here are a few tips for refinishing a table. As a bonus, here are tricks on how to fix an old wobbly chair!

Restoring antiques is satisfying for many reasons, but can also be expensive. Here is the cost of reupholstering a couch. So when deciding if a particular piece of furniture is worth restoring, take into account its resale value plus intangibles, like your personal connection with the piece.

“Beauty is in the eye of the beholder,” says Peter Triestman of Olek, Inc., an antique restoration company in Orange, New Jersey. “Because of this, some of your furniture decisions will probably be based largely on aesthetics and nostalgia. But also consider the environmental costs of buying new and disposing of the old. Virtually any wood piece is restorable, but the older the piece, the more repairable it is.”

Also, check how to decide which furniture is worth keeping and how to get rid of unwanted furniture.

Can I DIY Antique Furniture Repair?

Is antique furniture repair something that an intrepid DIYer can handle? Sometimes.

“Most pieces could just use a good cleaning and possibly an application of paste wax,” says Young, who runs Astonish Restoration in Roanoke, Virginia.

Other times, it’s more complicated.

With larger repairs, like loose chairs, it’s vital to put them back together in the same way they were made. “There should be no reason to attach screws, straps, wire, fiberglass or gum — yes, we have seen repairs attempted with chewing gum,” says Young. That’s because the furniture was designed with the technology of the day, and altering that will cause more structural harm than good. You need to know how to reupholster a chair correctly to restore it fully.

Glue is another sticking point. Besides scraping off old adhesives before applying new ones, it’s crucial to learn what was commonly used in that period and apply a similar type. According to all three experts, epoxy, superglue, and foaming polyurethane usually aren’t the best options.

Before launching into any antique restoration project, research techniques and materials and practice on some yard sale specials.

“And pick up a bunch of antique tools,” Triestman says. “They’re cheap and last forever.” When in doubt, ask a pro’s opinion first.

Should I Restore This Piece of Old Furniture?

According to Triestman, Young and Freddy Roman of The Furniture Repair Shop, in Acton, Mass., here is what to consider when contemplating a furniture restoration project. Before you send your old furniture to the landfill, check out these inspiring upcycling furniture ideas for cabinets, chairs, sofas, and more!

Oh if you’re wondering what to do with that old sofa, rocking chair, or desk? Check this collection of options to know where to donate furniture.

Wooden antique furniture

To tell if a piece is an antique rather than a 20th-century reproduction, look at the drawers. If the dovetails are of uneven width, Triestman says, then it’s a true antique.

“Right now true antiques, those 200 years or older, are going for a bargain, high end or not,” says Roman. “The prices of antiques makes you wonder why people are buying factory-made furniture.” Don’t want to restore it? Here’s how to get rid of old furniture.

Caned and wicker furniture

“Hand-caned and woven seats can be very expensive,” says Young. “But again, sometimes the sentimental value wins out over the market value.”

These can be less expensive if the restoration is done with machined cane sheets. Otherwise, Young says, “It can be hard to find craftspeople who are still hand caning and weaving. But it is something one can learn to do themselves, if interested.”

If you do try your hand at it, Triestman suggests adding a tablespoon of glycerine per bucket of water before soaking the caning. That keeps it supple.

Veneer furniture

“Veneer gets a bad name, but really, veneer is amazing and showcases the beauty of the woods in the world,” says Roman.

Assessing it means considering the substrate the veneer is on, as well as how thick the veneer itself is. “Many historic antiques have plenty of veneer of great thickness that a restorer can repair, or even a DIYer with patience and understanding,” says Roman.

Make sure to buy the appropriate cut of veneer. Try to cut pieces with matching grain lines to the existing furniture. And, Triestman says, be sure to scrape out the old glue with a chisel before inlaying the new elements.

Upholstered furniture

DIYing any upholstery is tricky unless you have exceptional sewing skills. It’s also expensive.

“Upholstered pieces are a lot of work, compared to cheap prices to buy mass-produced pieces today, and generally have little value when done unless from a noted designer,” says Triestman. But once reupholstered, a piece should last longer than contemporary furniture. Here are a few tips to rescue and reupholster your office chair.

Bent plywood furniture

Typically, bent plywood pieces must be taken to a professional. To figure out if it’s worth it, assess the quality of construction and stress the chair or table to see whether it’s splitting apart within the layers.

“If it is, that indicates that the glue is failing, and will progress rapidly with use,” says Triestman. “It’s not possible to put new glue over the old. It won’t hold.”

Mid-century modern furniture

“Right now, the clean simple lines of less-is-more is appealing to folks,” says Roman. To better understand a particular piece’s value, he recommends researching the big makers of mid-century and Danish modern furniture. “But that said, seeing a rosewood piece often tells you this piece is quality,” he says.

Painted furniture

“There is often more value under the paint,” says Roman. “It’s amazing what people paint these days. There are still treasures out there waiting to be found. And everything can be repaired. It’s wood, and it grows on trees.”

And there’s always a chance the repair will unearth a lost gem of humanity. It’s why flipping furniture can be a fun hobby or past-time for many.

“My favorite stories are all of the fun things we find inside pieces, or maybe written on them,” says Young. “We had a small table that was our customer’s when she was a little girl. We found on the bottom where she had written, ‘I am so mad at mommy. She won’t let me go over to Patti’s. But I love my daddy!’ ”